通知公告

郑重声明:深圳鹏芯集成电路在深圳仅龙华镇明珠商务大厦一家,无任何分公司,我公司只认可鹏芯公司账号,如果客户有汇入他人账号均与我公司无关,后果自负。如果有他人员冒充本公司名义与客户签订合同,我公司将追究其法律责任!如果有其他QQ联系客户请认真鉴定,客户可以拨打本公司官网座机电话与我们确认。STM32F103系列   STM32F101系列IC解密,STM8 系列IC解密,STC10系列   STC11系列   STC12系列IC解密,STC15系列IC解密全系列都可解密。时间只要三天,保证百分百一次性成功。 已成功为多名客户芯片解密、有需要的可电话或QQ联系鹏芯!

当前位置:IC解密> IC解密 > 浏览正文

AT89C51CC02解密

深圳鹏芯集成电路长期提供ATMEL系列众多单片机型号的解密服务,目前,AT89系列单片机解密技术已经被成功破解,解密周期短、解密成功率高、解密价格合理。在此,我们以AT89C51CC02单片机解密为例进行说明,更多解密详情请咨询电话:0755-23121075   

 AT89C51CC02描述:  Part of the CANaryTM family of 8-bit microcontrollers dedicated to CAN network applications,the T89C51CC02 is a low-pin count 8-bit Flash microcontroller.In X2 Mode a maximum external clock rate of 20 MHz reaches a 300 ns cycle time.Besides the full CAN controller T89C51CC02 provides 16K Bytes of Flash memory including In-System Programming (ISP), 2K Bytes Boot Flash Memory, 2K Bytes EEPROM and 512 Bytes RAM.Special attention is payed to the reduction of the electro-magnetic emission ofT89C51CC02.   

 AT89C51CC02特征:
  80C51 Core Architecture
  256 Bytes of On-chip RAM
  256 Bytes of On-chip XRAM
  16K Bytes of On-chip Flash Memory
  – Data Retention: 10 Years at 85°C
  – Erase/Write Cycle: 100K
  Boot Code Section with Independent Lock Bits
  2K Bytes of On-chip Flash for Bootloader
  In-System Programming by On-Chip Boot Program (CAN, UART) and IAP Capability
  2K Bytes of On-chip EEPROM
  – Erase/Write Cycle: 100K
  14-sources 4-level Interrupts
  Three 16-bit Timers/Counters
  Full Duplex UART Compatible 80C51
  Maximum Crystal Frequency 40 MHz. In X2 Mode, 20 MHz (CPU Core, 40 MHz)
  Three or Four Ports: 16 or 20 Digital I/O Lines
  Two-channel 16-bit PCA
  – PWM (8-bit)
  – High-speed Output
  – Timer and Edge Capture
  Double Data Pointer
  21-bit Watchdog Timer (7 Programmable bits)
  A 10-bit Resolution Analog-to-Digital Converter (ADC) with 8 Multiplexed Inputs
  Full CAN Controller
  – Fully Compliant with CAN rev.# 2.0A and 2.0B
  – Optimized Structure for Communication Management (Via SFR)
  – 4 Independent Message Objects
  -Each Message Object Programmable on Transmission or Reception
   -Individual Tag and Mask Filters up to 29-bit Identifier/Channel
  -8-byte Cyclic Data Register (FIFO)/Message Object
  -16-bit Status and Control Register/Message Object
  -16-bit Time-Stamping Register/Message Object
  -CAN Specification 2.0 Part A or 2.0 Part B Programmable for Each Message Object
  -Access to Message Object Control and Data Registers Via SFR
  -Programmable Reception Buffer Length up to 4 Message Objects
  -Priority Management of Reception of Hits on Several Message Objects Simultaneously (Basic CAN Feature)
  -Priority Management for Transmission
  -Message Object Overrun Interrupt
  – Supports
  -Time Triggered Communication
  -Autobaud and Listening Mode
  -Programmable Automatic Reply Mode
  1-Mbit/s Maximum Transfer Rate at 8 MHz(1) Crystal Frequency In X2 Mode
  Readable Error Counters
  Programmable Link to On-chip Timer for Time Stamping and Network Synchronization
  Independent Baud Rate Prescaler
  Data, Remote, Error and Overload Frame Handling
  Power-saving Modes
  – Idle Mode
  – Power-down Mode
  Power Supply: 3 Volts to 5.5 Volts
  Temperature Range: Industrial (-40° to +85°C)
  Packages: SOIC28, SOIC24, PLCC28, VQFP32

十年专业芯片解密、PCB抄板、克隆 电路板生产加工 
深圳市鹏芯集成电路有限公司
咨询热线:0755-23121075  23121076
手机:15338856653  15361856696
QQ :1879000686   1557277904
微信公众号:sz_pengchip   
公司地址:深圳市宝安区龙华镇梅龙路862号明珠商务大厦8A

分享到:

【 字体: 】【打印此页】 【返回】【顶部】【关闭